Hammerite Smooth Aerosol WHITE

Product Description
Hammerite Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one
Application Description
Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes .Apply light even coats, from a distance of approximately 15cm (6 inches) and keep the aerosol moving. Do NOT concentrate spray in one spot. Apply 3-4 coats for maximum protection and allow 15 minutes between coats. Between coats invert can and spray for 2 seconds to avoid blockages
Health & Safety
“Flame, Exclamation mark Danger Contains acetone Extremely flammable aerosol. Causes serious eye irritation. May cause drowsiness or dizziness. Pressurized container- may burst if heated.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use.IF INHALED- Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F.Dispose of contents and container in accordance with all local, regional, national or international regulations. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking.
Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.